%20(10).png)
Whether you need to 3D print large parts or several smaller parts such as manufacturing aids, assembly fixtures, or end-use parts, the new Stratasys F770 3D printer by Stratasys® steps in to boost your manufacturing production.
The largest build envelope and highest throughput with a heated chamber of 39.4 x 24 x 24 inches.
Functional materials such as SSYS ABS and ASA. 200 cubic inches material packaging for long unsupervised run times.
An internal camera lets you monitor progress remotely. The F770 can run up to 140 hours, day and night, with no interruption.
The largest build envelope and highest throughput with a heated chamber of 39.4 x 24 x 24 inches.
Functional materials such as SSYS ABS and ASA.
200 cubic inches material packaging for long unsupervised run times.
An internal camera lets you monitor progress remotely. The F770 can run up to 140 hours, day and night, with no interruption.
With a fully heated chamber, the F770 is able to produce fully dense parts.
✦ Intuitive Operation ✦ GrabCAD software ✦ Advanced Features for tooling ✦ Large part-specific options ✦ Variable Slice Height ✦ Mobile monitoring ✦ One head, multiple slice heights ✦ Component-based replacement parts.
F770 has a manufacturing data communication protocol included, MTConnect, ready to plug into your smart factory floor.
Meet the experts and solve your most challenging jobs. Experience a live one-on-one demo tailored for you with our Application Engineers.
Build Tray Size
1000 x 610 x 610 mm [39.4 x 24 x 24 in. / 22,677 in3]
Material delivery
200 in3 coil box (3277 cm3)
Materials
ASA – IvoryABS-M30™ – BlackSR-30™ soluble support material
Part accuracy
XY part accuracy = +/- 0.254 mm (+/- 0.010 in.) or +/- 0.002 mm/mm (+/- 0.002 in./in.), whichever is greaterZ part accuracy = +/- 0.200 mm (+/- 0.008 in.) or +/- 0.002 mm/mm (+/- 0.002 in./in.), plus 1 layer height
Workstation compatibility
Wired and wireless (with USB dongle) network interfaces using standard TCP/IP protocols at 100 MBPS minimum
Software
GrabCAD Print, Insight, Control Center™, MTConnect enabled
System Size and Weight
175 x 124 x 196 cm (69 x 49 x 77 in.) 658 kg (1450 lbs.)
Power requirements
3 phase, 208V, 30A, 5 wire, 47-63 Hz frequency
Operating Conditions
Operating temperature 15 °C to 30 °C (59 °F to 86 °F)Operating Humidity 30-70% - 39 in. clearance on each side of the printer
Facility requirements
Double-door width for installation, vacuum pump within the system – no shop air required, forklift uncrating and installation.
Installation requirements
Crate = 186.7 cm W x 146 cm D x 225.4 cm H (73.5 in. W x 57.5 in. D x 88.75 in. H) Crated weight = 907 kg (2000 lbs)
%20(2).png)
%20(3).png)