Question?

We're here to help.

Start Chat

Architects and engineers have one common goal: to communicate design ideas through illustrations that have lifelike experiences of a space or building even before they are being built. HP DesignJet T-series can lead to more sophisticated and eye-popping designs that represent designs intent accurately before any physical work on a project begins. These solutions achieve sharp, true-color prints to support an architect’s requirements.


Stratasys J750 Digital Anatomy
Stratasys J750 Digital Anatomy

If seeing is believing, holding something this vivid is knowing for sure.

  • System Height and Weight
    1400 x 1260 x 1100 mm (55.1 x 49.6 x 43.4 in.); 430 kg (948 lbs.)
  • Build Size
    Stratasys J735: 350 x 350 x 200 mm (13.8 x 13.8 x 7.9 in.)
    Stratasys J750: 490 x 390 x 200 mm (19.3 x 15.35 x 7.9 in.)
  • Layer Thickness
    Horizontal build layers down to 14 microns (0.00055 in.)
  • Accuracy
    Typical deviation from STL dimensions, for models printed with rigid materials, based on size: under 100 mm – ±100μ; above100 mm – ±200μ or ± 0.06% of part length, whichever is greater.
READ MORE
HP PageWide XL 3900 MFP
HP PageWide XL 3900 MFP

Print mono and color, all in one device

  • Print quality (best)
  • Color: 1200 x 1200 dpi
  • Print technology: HP PageWide Technology
  • Number of print cartridges: 4 (1 x 400-ml per color)
  • Ink types: Pigment-based (cyan, magenta, yellow, black)
    Dynamic security enabled printer. Only intended to be used with cartridges using an HP original chip. Cartridges using a non-HP chip may not work, and those that work today may not work in the future
  • Line accuracy:
    ±0.1%[2]
  • Scan resolution, optical:
    1200 dpi
  • Scanner type:
    36-in (91-cm) CIS scanner
READ MORE
HP PageWide XL 4100/4600 Printer series
HP PageWide XL 4100/4600 Printer series

Do the work of two printers with one—at a lower cost than LED.

  • Up to 10 D/A1 pages/minute monochrome and color
  • Fast 30-second first page out
  • Available multifunction device with integrated 1200 dpi scanner or printer
  • Up to 4 rolls with 100-page top stacker
  • Fade- and moisture-resistant prints with HP PageWide XL pigment ink
  • PIN printing, self-encrypting HDD with AES-256, Secure Disk Erase and IPSec
READ MORE
Roland MDX-50
Roland MDX-50

An ideal solution for short-runs and prototypes.

  • Acceptable materials: Resins such as chemical wood and modeling wax (metal not supported)
  • Operating range
    X: 15.80in (400mm)
    Y: 12.00in (305mm)
    Z: 5.315in (135mm)
  • Table size
    W: 15.80in (400mm)
    D: 12.00in (305mm)
  • Loadable workpiece size
    X: 15.80in (400mm)
    Y: 12.00in (305mm)
    Z: 3.90in (100mm)
READ MORE
Roland MDX  540 & 540 S
Roland MDX 540 & 540 S

Ideal for producing everything from functional and snap-fit parts and prototypes to light metal molds and custom jewelry.

  • Usable Materials Plastic, resin, wood and non-ferrous metals
  • XYZ-Axis Travel
    19.6(X) x 15.7(Y) x 6.1″(Z)[500 (X) x 400 (Y) x 155 mm (Z)]
  • Loadable workpiece size with optional rotary axis
    (ZCL-540) * 7.0” Diameter x 14.6” Length [177.8mm Diameter x 370.8mm Length]
  • Actual milling area is smaller
    Distance From Spindle Nose to Table Maximum 10″ (254mm)
  • Table Size
    21.7(W) x 16.5″(D) [550(W) x 420mm (D)]
  • Loadable workpiece weight
    At acceleration of 0.2G: maximum 26lb (12kg), 0.1G: 44lb (20kg), 0.05G: 44lb (20kg)
READ MORE
Stratasys J750 & J735
Stratasys J750 & J735

If seeing is believing, holding something this vivid is knowing for sure.

  • System Height and Weight
    1400 x 1260 x 1100 mm (55.1 x 49.6 x 43.4 in.); 430 kg (948 lbs.)
  • Build Size
    Stratasys J735: 350 x 350 x 200 mm (13.8 x 13.8 x 7.9 in.)
    Stratasys J750: 490 x 390 x 200 mm (19.3 x 15.35 x 7.9 in.)
  • Layer Thickness
    Horizontal build layers down to 14 microns (0.00055 in.)
  • Accuracy
    Typical deviation from STL dimensions, for models printed with rigid materials, based on size: under 100 mm – ±100μ; above100 mm – ±200μ or ± 0.06% of part length, whichever is greater.
READ MORE
Artec Eva
Artec Eva

Fast 3D scanner for professionals. F119: F123: F138: F119: F124.

  • 3D accuracy0.1 mm
  • 3D resolution 0.5 mm
  • Object size Starting from 10 cm
  • Full color scanning Yes
  • Target-free tracking Hybrid geometry and color based
  • 3D reconstruction rate 16 FPS
  • Output formats All popular formats, including STL, OBJ, PLY, BTX
  • Weight of scanner 0.9 kg
READ MORE
Roland VersaUV LEF-12i Desktop UV Flatbed Printer
Roland VersaUV LEF-12i Desktop UV Flatbed Printer

Profitable UV printing starts here.

  • Maximum Print Area: 12″” × 11″”
  • 305 mm × 280 mm
  • Ink Configuration Options: CMYK + Clear (gloss) + White
  • Included RIP Software: VersaWorks 6 Ideal for: Short-run customization of USB drives, smart phone covers, photo frames and other small objects
READ MORE
Roland VersaUV LEF2-300 Benchtop UV Flatbed Printer
Roland VersaUV LEF2-300 Benchtop UV Flatbed Printer

Expansive product customization with a bigger and more productive flatbed.

  • Maximum Print Area: 30″” × 13″”
    770 mm × 330 mm
  • Ink Configuration Options: CMYK + Clear (gloss) + Clear (gloss)+ White CMYK + Clear (gloss) + White+ Primer
  • Included RIP Software: VersaWorks 6
  • Ideal for: Volume production of small to medium-sized items, plus pre-primed printing onto various substrates and unique surfaces.
READ MORE
Roland VersaUV LEF2-200 Benchtop Flatbed UV Printer
Roland VersaUV LEF2-200 Benchtop Flatbed UV Printer

On demand customization of a wide variety of products and substrates.

  • Maximum Print Area: 20″” × 13
    508 mm × 330 mm
  • Ink Configuration Options: CMYK + Clear (gloss) + White CMYK + White + White
  • Included RIP Software: VersaWorks 6
  • Ideal for: Short-run customization of small to medium-sized items, plus pre-primed printing onto various substrates and unique surfaces.
READ MORE

1 2