STANDARD PROCESS AREAS

• Infinite 4000
  60″ Width. Lengths from 48″ to 50ft
• Infinite 5000
  72″ Width. Lengths from 120″ to 50ft
• Infinite 6000
  85″ Width. Lengths from 120″ to 50ft
• Infinite 8000
  103″ Width. Lengths from 120″ to 50ft
• INFINITE 10,000
  128″ Width. Lengths from 120″ to 50ft
• OPTIONAL ADDITIONAL LENGTH
  24″ Increments
• STANDARD GANTRY CLEARANCE
  6″
• OPTIONAL GANTRY CLEARANCE
  8″, 10″, 12″, 13″, 15″, 18″
• DRIVE SYSTEM
  X, Y – Rack and Pinion, Z – Ballscrew
• TYPICAL POSITIONING SPEED
  25m/min – 50m/min
• CONTROL SYSTEM
  AXYZ A2MC Controller
  7 Segment motion profile
  FPGA processor for high speed complex calculations
  Dedicated true NC control – G and M codes
  Network connection
  Large solid state on-board memory
  AXYZ Smart Console
• Power Requirements
  208-230V 3 Phase / 440-460V 3 Phase

• Laser Material Processing Area (W x H):
  ULS VLS 2.30 – 16 x 12 in (406 x 305 mm)
  ULS VLS 3.60 – 24 x 12 in (610 x 305 mm)
• Maximum Part Size (W x H x D)
  ULS VLS 2.30 – 18.75 x 14.6 x 4 in (476 x 370 x 102 mm)
  ULS VLS 3.60 – 26.75 x 14.6 x 4 in (679 x 370 x 102 mm)
• Overall Dimension (W x H x D)
  26 x 14 x 25 in (661 x 356 x 635 mm)
• Rotary Capacity Max Diameter:
  4.5 in (115 mm)
• Min Diameter:
  1 in (25.4 mm)
• Motorized Z Axis Lifting Capacity 20 lbs (9 kg)
• Available Focus Lenses 2.0 in (50 mm)
  HPDFO™ (High Power Density Focusing Optics)
• Laser Options:
  ULS VLS 2.30 – 10, and 30 Watts
  ULS VLS 3.60 – 10, 30, 40, 50 and 60 Watts
• Laser Platform Interface Panel Five button keypad

• Work Area 40 x 24 in. (1016 x 610 mm)
  
• Max. Part Size (W x L x H) All doors closed 41.4 x 25.4 x 11 in. (1053 x 647 x 280 mm)
  All doors open 41.4 x ∞ x 11 in. (1053 x ∞ x 280 mm)
  
• Table Size Standard Grid Cutting Table 40.1 x 24.1 in. (1019 x 613 mm)
  
• Dimensions (W x L x H) 56.7 x 34.5 x 41.3 in. (1440 x 900 x 1048 mm)
  
• Weight CO2 30W~40W 260 kg / 573 lb
  
• CO2 60~100W 270 kg/ 595 lb
  
• Fiber 20W~60W 260 kg / 573 lb
  
• Laser Source 10.6-μm CO₂ laser: 30 to 100W
  9.3-μm CO₂ laser: 60W, Fiber Laser: 20 to 60W
  
• Cooling Air-cooled, Operating environment temperature 15°- 30°C (59°- 86°F)
  
• Drive Closed-loop DC servo control
  
• Maximum Motor Speed 140 IPS
  
• Speed Control Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)
  
• Power Control Adjustable from 0~100% (Up to 16 color-linked power settings per job)
  
• Engraving capability 256-level gray scale image processing capability

• Work Area 34 x 24 in. (860 x 610mm) Extendable to 38 x 24 in. (965 x 610 mm)
  
• Max. Part Size (W x L x H) All doors closed 39 x 25 x 7 in. (990 x 635 x 177 mm)
  All doors open 39 x ∞ x 7 in. (990 x ∞ x 177 mm)
  
• Table Size 40.3 x 27.7 in. (1025 x 705 mm)
  
• Dimensions (W x L x H) 53.7 x 34.6 x 39.7 in. (1365 x 880 x 1010 mm)
  
• Laser Source 10.6-μm CO2 laser: 30 to 100W
  
• Fiber laser: 20 / 30 / 50W
  
• Cooling Air-cooled, Operating environment temperature 15°- 30°C (60°- 86°F)
  
• Drive Closed-loop DC servo control
  
• Maximum Motor Speed 80 IPS
  
• Throughput* 260.9 in²/ hr (1683 cm²/ hr)
  
• Throughput* with SmartACT™ Enabled 322.1 in²/ hr (2078 cm²/ hr)
  
• Speed Control Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)
  
• Power Control Adjustable from 0~100% (Up to 16 color-linked power settings per job)
  
• Engraving capability 256-level gray scale image processing capability

• Work Area 34 x 24 in. (860 x 610 mm) Extendable to 38 x 24 in. (960 x 610 mm)
  
• Max. Part Size (W x L x H) All doors closed 39 x 25 x 7 in. (990 x 635 x 177 mm)
  All doors open 39 x ∞ x 7 in. (990 x ∞ x 177 mm)
  
• Table Size 40.3 x 27.7 in. (1025 x 705 mm)
  
• Dimensions (W x L x H) 53.7 x 34.6 x 39.7 in. (1365 x 880 x 1010 mm)
  
• Laser Source 30 to 100W 10.6-μm sealed CO2 Laser / 20W & 60W 9.3-μm sealed CO2 Laser Cooling
  
• Air-cooled, Operating environment temperature 15°-30°C (60°-86°F)
  
• Drive Closed-loop DC Servo Control
  
• Maximum Motor Speed 80 IPS
  
• Throughput* 260.9 in²/ hr (1683 cm²/ hr)
  
• Throughput* with SmartACT™ Enabled 322.1 in²/ hr (2078 cm²/ hr)
  
• Speed Control Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)
  
• Power Control Adjustable from 0~100% (Up to 16 color-linked power settings per job)
  
• Engraving capability 256-level gray scale image processing capability

• Work Area 25 x 18 in. (640 x 460 mm) Extendable to 29 x 18 in. (740 x 460 mm)
  
• Max. Part Size (W x L x H) All doors closed 30 x 19 x 6.5 in. (762 x 482.6 x 165 mm)
  
• All doors open 30 x ∞ x 6.5 in. (762 x ∞ x 165 mm)
  
• Table Size 31.1 x 20.9 in. (790 x 530 mm)
  
• Dimensions (W x L x H) 44.3 x 28.3 x 39.6 in. (1125 x 720 x 1005 mm)
  
• Laser Source 12 to 100W 10.6-μm sealed CO2 Laser / 20W & 60W 9.3-μm sealed CO2 Laser Cooling
  
• Air-cooled, Operating environment temperature 15°-30°C (60°-86°F) Drive
  
• Closed-loop DC servo control
  
• Maximum Motor Speed 80 IPS**
  
• Throughput* 260.9 in²/ hr (1683 cm²/ hr)
  
• Throughput* with SmartACT™ Enabled 322.1 in²/ hr (2078 cm²/ hr)
  
• Speed Control Adjustable from 0.1-100% (Up to 16 color-linked speed settings per job)
  
• Power Control Adjustable from 0-100% (Up to 16 color-linked power settings per job)
  
• Engraving capability 256-level gray scale image processing capability

• Work Area 25 x18 in. (640 mm x 460 mm) Extendable to 29×18 in. (740 x 460 mm)
  
• Max. Part Size (W x L x H) All doors closed 30 x 19 x 6.5 in. (762 x 482.6 x 165 mm)
  
• All doors open 30 x ∞ x 6.5 in. (762 x ∞ x 165 mm)
  
• Table Size 31.1 x 20.9 in. (790 x 530 mm)
  
• Dimensions (W x L x H) 44.3 x 28.3 x 39.6 in. (1125 x 720 x 1005 mm)
  
• Laser Source 12 to 100W 10.6-μm sealed CO2 Laser / 20W & 60W 9.3-μm sealed CO2Laser
  
• Cooling Air-cooled, Operating environment temperature 15o – 30oC (60o – 86oF)
  
• Drive Closed-loop DC Servo control
  
• Maximum Motor Speed 60 IPS
  
• Throughput* 245.5 in²/ hr (1584 cm²/ hr)
  
• Throughput* with SmartACT Enabled 283.4 in²/ hr (1828.8 cm²/ hr)
  
• Speed Control Adjustable from 0.1-100% of 60IPS (Up to 16 color-linked speed settings per job)
  

• Max. Part Size(W x L x H)
  All doors closed 27 x 19 x 6.5 in. (685 x 482 x 165 mm)
  All doors open 27 x ∞ x 6.5 in. (685 x ∞x 165 mm)
  
• Table Size 31.1 x 20.9 in. (790 x 530 mm)
  Dimensions (WxDxH) 44.3 x 28.3 x 39.6 in. (1125 x 720 x 1005 mm)
  
• Laser Source – 12, 25, 30, 40, 60W
  
• Cooling Air-cooled, Operating environment temperature 15°- 30°C (60°- 86°F)
  
• Drive Closed-loop DC Servo Control
  
• Throughput* 166.3 in2 / hr (1072.8 cm2 / hr)
  
• Speed ControlAdjustable from 0.1~100% of 42 IPS (Up to 16 color-linked speed settings per job)
• Power Control Adjustable from 1-100% (Up to 16 color-linked power settings per job)
  
• Engraving capability 256-level gray scale image processing capability

• Venus II: VII-12
  
• Laser Source: 12W
  
• Sealed CO2 Laser
  
• Cooling: Air-cooled, Operating environment temperature 15°-30°C (60°-86°F)
  
• Work Area 11.8 in. x8.3 in. (300 mm x 210 mm)
  
• Max. Part Size (W x L x H) 14.2 in. x 11.8 in. x 2.8 in. (360 mm x 300 mm x 70 mm)
  
• Dimensions (W x L x H) 24.4 in. x 17.1 in. x 18.1 in. (620 mm x 435 mm x 460 mm)
  
• Weight 32 Kg / 70 lb
  
• Drive Closed-loop DC Servo Control
  
• Maximum Speed* 20 IPS
  
• Throughput* 110.7 in2 / hr (714.1 cm2 / hr)
  
• Speed Control Adjustable from 0.1 to 100% (Up to 16 color-linked speed settings per job)
  
• Power Control Adjustable from 0-100% (Up to 16 color-linked power settings per job)
  
• Engraving capability 256-level gray scale image processing capability

• Spacious 18″x12″ (458×305 mm) working space
• Closed-loop DC servo motor for accurate and rapid movement
  
• TrueImage innovation produces exceptional engraving quality
  
• 30W cuts through 10 mm thick acrylic with a single pass
  
• Intuitive Drag-N-Engrave feature