Produce high quality promotional items including advertising specialties, logo products and corporate gifts.
Designed For Versatility, Built For Reliability.
Printing Method: Direct inkjet garment printer
Machine Size: 55″(W) x 51″(D) x 21″(H) (1400mm x 1290mm x 535mm)
Machine Weight: 260lb (approx.118kg)
Platen Sizes: Maximum print size is 16″ x 21″ / 40,6cm x 53,3cm
Ink Type: Water based pigment ink
Ink-Head Type: On demand piezo head
Number of Ink-Heads: 2 print heads / 8 ink channels
Print Resolution: 1200 dpi x 1200 dpi
Print Mode: Single or double for CMYK. Underbase and highlight for white.
Data Output: Printer driver (USB, File output)
Power Supply: AC 100V-240V, 50/60Hz ± 1Hz
Power Consumption: 0.8A (average) (Reference: 0.3A – during circulation)
Ink Cure: Heat press machine can be used at 356°F (180°C) and 35 seconds duration. For higher volume production, a conveyor oven is recommended to be used at 320° (160°) for three and a half minutes. Time and temperature may vary depending on which manufacturer’s dryer is used.
Pre-Treatment: Before printing, apply pre-treatment using either a manual or automatic device and then dry garment using a heat-press, being sure to follow all manufacturer’s instructions. Pre-treatment is necessary for white ink.
A low-cost, easy-to-operate solution for metal gift ware personalization.
Imprintable material Gold, silver, copper, platinum, brass, aluminum, iron, stainless steel, titanium, etc.
(Vickers hardness [HV] of the imprint surface must be 200 or less.)
Loadable material size Using a base table + base plate: Max. 3.9 in (W). X 7.9 in. (L) X 1.6 in. (H)
(100 mm (W) X 200 mm (L) X 40 mm (H)) or
7.9 in. (W) X 3.9 in. (L) X 1.6 in. (H)
(200 mm (W) X 100 mm (L) X 40 mm (H))
Using a base plate only: Max. 3.9 in. (W) X 7.9 in. (L) X 2.8 in. (H)
(100 mm (W) X 200 mm (L) X 70 mm (H)) or
7.9 in. X 3.9 in. X 2.8 in.
(200 mm (W) X 100 mm (L) X 70 mm (H))
The above are for when the cover is closed. When the cover is open, there is no limit on how large the material can be, but the imprint area of the material must be placed within the imprint area.
Imprint area Maximum imprintable area 3.2 in. (W) X 3.2 in. (D) X 2.8 in. (H)
80 mm (W) X 80 mm (D) X 70 mm (H)
Recommended imprint area 2.0 in. (W) X 2.0 in. (D) X 2.8 in (H)
50 mm (W) . 50 mm (D) . 70 mm (H)