Question?

We're here to help.

Start Chat

This is the new age of fashion – tailored in a more personalized lifestyle. Our DTG and roll-to-roll solutions provide you with an unprecedented color gamut and the ability to print any design, in any number of colors, at any level of detail. Kornit digital is designed to provide the most ecological and sensible solution to digital textile printing.


Brother GTX-424 (Bulk)
Brother GTX-424 (Bulk)

Designed For Versatility, Built For Reliability.

  • Printing Method: Direct inkjet garment printer
  • Machine Size: 55″(W) x 51″(D) x 21″(H) (1400mm x 1290mm x 535mm)
  • Machine Weight: 260lb (approx.118kg)
  • Platen Sizes: Maximum print size is 16″ x 21″ / 40,6cm x 53,3cm
  • Ink Type: Water based pigment ink
  • Ink-Head Type: On demand piezo head
  • Number of Ink-Heads: 2 print heads / 8 ink channels
  • Print Resolution: 1200 dpi x 1200 dpi
  • Print Mode: Single or double for CMYK. Underbase and highlight for white.
  • Data Output: Printer driver (USB, File output)
  • Power Supply: AC 100V-240V, 50/60Hz ± 1Hz
  • Power Consumption: 0.8A (average) (Reference: 0.3A – during circulation)
  • Ink Cure: Heat press machine can be used at 356°F (180°C) and 35 seconds duration. For higher volume production, a conveyor oven is recommended to be used at 320° (160°) for three and a half minutes. Time and temperature may vary depending on which manufacturer’s dryer is used.
  • Pre-Treatment:  Before printing, apply pre-treatment using either a manual or automatic device and then dry garment using a heat-press, being sure to follow all manufacturer’s instructions. Pre-treatment is necessary for white ink.
READ MORE
Brother PR670E
Brother PR670E

Perfect choice for a small or home-based business and sewing enthusiasts.

  • Maximum embroidery speed (stitches per minute): 1000 spm
  • Maximum embroidery area: 200 mm x 300 mm
  • Built-in embroidery patterns: 151
  • Build-in embroidery fonts: 37
  • On-screen editing: Yes
  • Usb: Yes
  • Jump stitch & wiper function: Yes
  • Camera function: No
  • Needle number for embroidery: 6
READ MORE
Brother TC-102 – The Cube
Brother TC-102 – The Cube

Fast and easy pre-treatment machine.

  • Fully enclosed unit contains spray mist
  • Consistent, reliable spraying results
  • Adjustable spray length and volume
  • Electric spray system: (110v + 200v)
  • Triple coated frame to resist corrosion
  • Quick and easy clean up
  • Single spray nozzle
  • Pretreatment area: 16” × 20”
  • Dimensions: 193/4”(w) × 291/2” ( l ) × 231/8” (h)
READ MORE
Brother GTX-423
Brother GTX-423

Designed For Versatility, Built For Reliability.

  • Printing Method: Direct inkjet garment printer
  • Machine Size: 55″(W) x 51″(D) x 21″(H) (1400mm x 1290mm x 535mm)
  • Machine Weight: 260lb (approx.118kg)
  • Platen Sizes: Maximum print size is 16″ x 21″ / 40,6cm x 53,3cm
  • Ink Type: Water based pigment ink
  • Ink-Head Type: On demand piezo head
  • Number of Ink-Heads: 2 print heads / 8 ink channels
  • Print Resolution: 1200 dpi x 1200 dpi
  • Print Mode: Single or double for CMYK. Underbase and highlight for white.
  • Data Output: Printer driver (USB, File output)
  • Power Supply: AC 100V-240V, 50/60Hz ± 1Hz
  • Power Consumption: 0.8A (average) (Reference: 0.3A – during circulation)
  • Ink Cure: Heat press machine can be used at 356°F (180°C) and 35 seconds duration. For higher volume production, a conveyor oven is recommended to be used at 320° (160°) for three and a half minutes. Time and temperature may vary depending on which manufacturer’s dryer is used.
  • Pre-Treatment:  Before printing, apply pre-treatment using either a manual or automatic device and then dry garment using a heat-press, being sure to follow all manufacturer’s instructions. Pre-treatment is necessary for white ink.
READ MORE
GCC S400
GCC S400

Your Best Ever, Beyond Expectation, Unlimited Laser Machine.

  • Work Area 40 x 24 in. (1016 x 610 mm)
  • Max. Part Size (W x L x H) All doors closed 41.4 x 25.4 x 11 in. (1053 x 647 x 280 mm)
    All doors open 41.4 x ∞ x 11 in. (1053 x ∞ x 280 mm)
  • Table Size Standard Grid Cutting Table 40.1 x 24.1 in. (1019 x 613 mm)
  • Dimensions (W x L x H) 56.7 x 34.5 x 41.3 in. (1440 x 900 x 1048 mm)
  • Weight CO2 30W~40W 260 kg / 573 lb
  • CO2 60~100W 270 kg/ 595 lb
  • Fiber 20W~60W 260 kg / 573 lb
  • Laser Source 10.6-μm CO₂ laser: 30 to 100W
    9.3-μm CO₂ laser: 60W, Fiber Laser: 20 to 60W
  • Cooling Air-cooled, Operating environment temperature 15°- 30°C (59°- 86°F)
  • Drive Closed-loop DC servo control
  • Maximum Motor Speed 140 IPS
  • Speed Control Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)
  • Power Control Adjustable from 0~100% (Up to 16 color-linked power settings per job)
  • Engraving capability 256-level gray scale image processing capability
READ MORE
GCC Spirit GLS Hypbrid
GCC Spirit GLS Hypbrid

CO2 & Fiber hybrid laser option in one machine system for both organic & metallic material processing.

  • Work Area 34 x 24 in. (860 x 610mm) Extendable to 38 x 24 in. (965 x 610 mm)
  • Max. Part Size (W x L x H) All doors closed 39 x 25 x 7 in. (990 x 635 x 177 mm)
    All doors open 39 x ∞ x 7 in. (990 x ∞ x 177 mm)
  • Table Size 40.3 x 27.7 in. (1025 x 705 mm)
  • Dimensions (W x L x H) 53.7 x 34.6 x 39.7 in. (1365 x 880 x 1010 mm)
  • Laser Source 10.6-μm CO2 laser: 30 to 100W
  • Fiber laser: 20 / 30 / 50W
  • Cooling Air-cooled, Operating environment temperature 15°- 30°C (60°- 86°F)
  • Drive Closed-loop DC servo control
  • Maximum Motor Speed 80 IPS
  • Throughput* 260.9 in²/ hr (1683 cm²/ hr)
  • Throughput* with SmartACT™ Enabled 322.1 in²/ hr (2078 cm²/ hr)
  • Speed Control Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)
  • Power Control Adjustable from 0~100% (Up to 16 color-linked power settings per job)
  • Engraving capability 256-level gray scale image processing capability
READ MORE
GCC Spirit GLS
GCC Spirit GLS

One of GCC’s flagship models deliver you extraordinary output quality with years R&D experience.

  • Work Area 34 x 24 in. (860 x 610 mm) Extendable to 38 x 24 in. (960 x 610 mm)
  • Max. Part Size (W x L x H) All doors closed 39 x 25 x 7 in. (990 x 635 x 177 mm)
    All doors open 39 x ∞ x 7 in. (990 x ∞ x 177 mm)
  • Table Size 40.3 x 27.7 in. (1025 x 705 mm)
  • Dimensions (W x L x H) 53.7 x 34.6 x 39.7 in. (1365 x 880 x 1010 mm)
  • Laser Source 30 to 100W 10.6-μm sealed CO2 Laser / 20W & 60W 9.3-μm sealed CO2 Laser Cooling
  • Air-cooled, Operating environment temperature 15°-30°C (60°-86°F)
  • Drive Closed-loop DC Servo Control
  • Maximum Motor Speed 80 IPS
  • Throughput* 260.9 in²/ hr (1683 cm²/ hr)
  • Throughput* with SmartACT™ Enabled 322.1 in²/ hr (2078 cm²/ hr)
  • Speed Control Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)
  • Power Control Adjustable from 0~100% (Up to 16 color-linked power settings per job)
  • Engraving capability 256-level gray scale image processing capability
READ MORE
GCC Laser Pro Spirit LS
GCC Laser Pro Spirit LS

Humanity design and high precise DC motor, its quality and reliability are beyond limitations.

  • Work Area 25 x 18 in. (640 x 460 mm) Extendable to 29 x 18 in. (740 x 460 mm)
  • Max. Part Size (W x L x H) All doors closed 30 x 19 x 6.5 in. (762 x 482.6 x 165 mm)
  • All doors open 30 x ∞ x 6.5 in. (762 x ∞ x 165 mm)
  • Table Size 31.1 x 20.9 in. (790 x 530 mm)
  • Dimensions (W x L x H) 44.3 x 28.3 x 39.6 in. (1125 x 720 x 1005 mm)
  • Laser Source 12 to 100W 10.6-μm sealed CO2 Laser / 20W & 60W 9.3-μm sealed CO2 Laser Cooling
  • Air-cooled, Operating environment temperature 15°-30°C (60°-86°F) Drive
  • Closed-loop DC servo control
  • Maximum Motor Speed 80 IPS**
  • Throughput* 260.9 in²/ hr (1683 cm²/ hr)
  • Throughput* with SmartACT™ Enabled 322.1 in²/ hr (2078 cm²/ hr)
  • Speed Control Adjustable from 0.1-100% (Up to 16 color-linked speed settings per job)
  • Power Control Adjustable from 0-100% (Up to 16 color-linked power settings per job)
  • Engraving capability 256-level gray scale image processing capability
READ MORE
GCC Spirit
GCC Spirit

Well-known for its perfect engraving performance makes it a bestselling model in GCC.

  • Work Area 25 x18 in. (640 mm x 460 mm) Extendable to 29×18 in. (740 x 460 mm)
  • Max. Part Size (W x L x H) All doors closed 30 x 19 x 6.5 in. (762 x 482.6 x 165 mm)
  • All doors open 30 x ∞ x 6.5 in. (762 x ∞ x 165 mm)
  • Table Size 31.1 x 20.9 in. (790 x 530 mm)
  • Dimensions (W x L x H) 44.3 x 28.3 x 39.6 in. (1125 x 720 x 1005 mm)
  • Laser Source 12 to 100W 10.6-μm sealed CO2 Laser / 20W & 60W 9.3-μm sealed CO2Laser
  • Cooling Air-cooled, Operating environment temperature 15o – 30oC (60o – 86oF)
  • Drive Closed-loop DC Servo control
  • Maximum Motor Speed 60 IPS
  • Throughput* 245.5 in²/ hr (1584 cm²/ hr)
  • Throughput* with SmartACT Enabled 283.4 in²/ hr (1828.8 cm²/ hr)
  • Speed Control Adjustable from 0.1-100% of 60IPS (Up to 16 color-linked speed settings per job)
READ MORE
GCC Mercury III
GCC Mercury III

The economical workhorse model allows user to fulfill all kinds of applications.

  • Max. Part Size(W x L x H)
    All doors closed 27 x 19 x 6.5 in. (685 x 482 x 165 mm)
    All doors open 27 x ∞ x 6.5 in. (685 x ∞x 165 mm)
  • Table Size 31.1 x 20.9 in. (790 x 530 mm)
    Dimensions (WxDxH) 44.3 x 28.3 x 39.6 in. (1125 x 720 x 1005 mm)
  • Laser Source – 12, 25, 30, 40, 60W
  • Cooling Air-cooled, Operating environment temperature 15°- 30°C (60°- 86°F)
  • Drive Closed-loop DC Servo Control
  • Throughput* 166.3 in2 / hr (1072.8 cm2 / hr)
  • Speed ControlAdjustable from 0.1~100% of 42 IPS (Up to 16 color-linked speed settings per job)
  • Power Control Adjustable from 1-100% (Up to 16 color-linked power settings per job)
  • Engraving capability 256-level gray scale image processing capability
READ MORE

1 2 3