Question?

We're here to help.

Start Chat

Showcase detailed and high quality artistry with the pinpoint accuracy and the variety of finishing effects possible with these finishing solutions.


AXYZ Innovator
AXYZ Innovator

The most versatile and customizable CNC router system in the industry.

STANDARD PROCESS AREAS

  • Infinite 4000
    60″ Width. Lengths from 48″ to 50ft
  • Infinite 5000
    72″ Width. Lengths from 120″ to 50ft
  • Infinite 6000
    85″ Width. Lengths from 120″ to 50ft
  • Infinite 8000
    103″ Width. Lengths from 120″ to 50ft
  • INFINITE 10,000
    128″ Width. Lengths from 120″ to 50ft
  • OPTIONAL ADDITIONAL LENGTH
    24″ Increments
  • STANDARD GANTRY CLEARANCE
    6″
  • OPTIONAL GANTRY CLEARANCE
    8″, 10″, 12″, 13″, 15″, 18″
  • DRIVE SYSTEM
    X, Y – Rack and Pinion, Z – Ballscrew
  • TYPICAL POSITIONING SPEED
    25m/min – 50m/min
  • CONTROL SYSTEM
    AXYZ A2MC Controller
    7 Segment motion profile
    FPGA processor for high speed complex calculations
    Dedicated true NC control – G and M codes
    Network connection
    Large solid state on-board memory
    AXYZ Smart Console
  • Power Requirements
    208-230V 3 Phase / 440-460V 3 Phase
READ MORE
ULS PLS Platform Series (PLS4.75, PLS6.75, and PLS6.150D)
ULS PLS Platform Series (PLS4.75, PLS6.75, and PLS6.150D)

Power and Productivity.

  • Laser Material Processing Area (W x H)
    ULS PLS4.75 – 24 x 18 in (610 x 457 mm)
    ULS PLS6.75 – 32 x 18 in (813 x 457 mm)
    ULS PLS6.150D – 32 x 18 in (813 x 457 mm)
  • Maximum Part Size (W x H x D)
    ULS PLS4.75 – 29 x 23 x 9 in (737 x 584 x 229 mm)
    ULS PLS6.75 – 37 x 23 x 9 in (940 x 584 x 229 mm)
    ULS PLS6.150D – 37 x 23 x 9 in (940 x 584 x 229 mm)
  • Overall Dimension (W x H x D) 36 x 39 x 36 in (914 x 991 x 914 mm)
  • Rotary Capacity Max Diameter 8 in (203.2 mm)
  • Motorized Z Axis Lifting Capacity 40 lbs (18 kg)
  • Available Focus Lenses 2.0 in (51 mm)
  • HPDFO™ (High Power Density Focusing Optics)
  • Laser Platform Interface Panel Keypad and LCD display show current file name, laser power, engraving speed, PPI and run time.
READ MORE
ULS VLS Platform Series (VLS3.60, VLS4.60, and VLS6.60)
ULS VLS Platform Series (VLS3.60, VLS4.60, and VLS6.60)

Flexible for Growing Business.

  • Laser Material Processing Area (W x H)
    ULS VLS3.60 – 24 x 12 in (610 x 305 mm)
    ULS VLS4.60 – 24 x 18 in (610 x 457 mm)
    ULS VLS6.60 – 32 x 18 in (813 x 457 mm)
  • Maximum Part Size (W x H x D)
    ULS VLS3.60 – 29 x 17 x 9 in (737 x 432 x 229 mm)
    ULS VLS4.60 – 29 x 23 x 9 in (737 x 584 x 229 mm)
    ULS VLS6.60 – 37 x 23 x 9 in (940 x 584 x 229 mm)
  • Overall Dimension (W x H x D)
    36 x 38 x 30 in (914 x 965 x 762 mm)
  • Rotary Capacity Max Diameter: 8 in (203 mm)
  • Motorized Z Axis Lifting Capacity 40 lbs (18 kg)
  • Available Focus Lenses 2.0 in (50 mm)
  • HPDFO™ (High Power Density Focusing Optics)
  • Laser Platform Interface Panel Five button keypad
READ MORE
ULS VLS Desktop Series (VLS2.30 and VLS3.50)
ULS VLS Desktop Series (VLS2.30 and VLS3.50)

Laser Technology on Your Desktop.

  • Laser Material Processing Area (W x H):
    ULS VLS 2.30 – 16 x 12 in (406 x 305 mm)
    ULS VLS 3.50 – 24 x 12 in (610 x 305 mm)
  • Maximum Part Size (W x H x D)
    ULS VLS 2.30 – 18.75 x 14.6 x 4 in (476 x 370 x 102 mm)
    ULS VLS 3.50 – 26.75 x 14.6 x 4 in (679 x 370 x 102 mm)
  • Overall Dimension (W x H x D)
    26 x 14 x 25 in (661 x 356 x 635 mm)
  • Rotary Capacity Max Diameter:
    4.5 in (115 mm)
  • Min Diameter:
    1 in (25.4 mm)
  • Motorized Z Axis Lifting Capacity 20 lbs (9 kg)
  • Available Focus Lenses 2.0 in (50 mm)
  • HPDFO™ (High Power Density Focusing Optics)
  • Laser Platform Interface Panel Five button keypad
READ MORE
GCC FMC 280
GCC FMC 280

Unique fiber cutting machine can cut metal sheet easily and efficiently.

  • FMC 280 FMC 280-Z1
  • Laser Source 1070nm fiber laser source, 1.5kW peak power
  • Work Area Normal 28 x 14.5in. (712 x 370mm)
  • With Thin Film Clamp 18 x 12 in. (458 x 305 mm)
  • Max. Part Size (W x L x H) 30.9 x 21.3 x 4.7 in. (786 x 542 x 120 mm)
  • Dimensions (W x L x H) 44.3 x 28.3 x 70.8 in. (1125 x 720 x 1800 mm)
  • Cooling Air Cool
  • Drive Closed-loop DC Servo Control
  • Maximum Motor Speed 20 IPS
  • Speed Control Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)
  • Power Control Adjustable from 0~100% (Up to 16 color-linked power settings per job)
  • Distance Accuracy 0.254 mm or 0.1% of move, whichever is greater
  • Z-Axis Movement Automatic
  • Engraving Capability) 256-level gray-scale image processing capability
READ MORE
GCC StellarMark I-series
GCC StellarMark I-series

Ultra-fast galvanometer fiber laser can raise productivity with marvelous marking quality.

  • StellarMark I-series IFII 20JFL IFII 20SHS IFII 30JFL IFII 60JFL
  • Laser Source Wavelength 1064 nm
  • Type Yb-doped, MOPA
  • Output Power 20W 30W 60W
  • Beam Mode TEM00
  • Beam Quality (M2) <1.3 <1.3 <1.3 <1.8
  • Frequency 1-400 kHz 1-1000 kHz 1-400 kHz 1-400 kHz
  • Waveform Single 25 Single Single
  • Cooling Air-cooled
  • Max. Linear Marking Speed 3,000 mm/s
  • Max. Marking Speed 10,000 mm/s
  • Electrical Requirements Power Supply 100~240V, 50/60 Hz Max 15 Amp
  • Power Consumption Max. 1650W
  • Dimensions Laser head L 508 x W 168 x H 185 mm
  • Control unit L 470 x W 360 x H 241 mm
  • Laser Marker Weight 9 kg
  • Control Unit Weight 25 kg
READ MORE
GCC S290 LS
GCC S290 LS

Reliable and cost efficient fiber laser system allows direct marking on metallic and plastic material.

  • S290LS S290LS-20SHS S290LS-20JFL S290LS-30JFL S290LS-60JFL
  • Laser Source Fiber laser: 20 / 30 / 60W 1064 nm
  • Laser M² <1.3 <1.3 <1.3 <1.8
  • Laser Peak Power (kW) >7 >4.5 >5.5 >7.8
  • Work Area 25 x 18 in. (640 x 460 mm) extendable to 29 x 18 in. (740 x 460 mm)
    Max. Part Size (W x L x H) All doors closed 31.5 x 22.4 x 6.5 in. (800 x 570 x 165 mm)
    All doors open 31.5 x ∞ x 6.5 in. (800 x ∞ x 165 mm)
  • Table Size 31.1 x 20.9 in. (790 x 530 mm)
  • Dimensions (W x L x H) 44.3 x 28.3 x 39.6 in. (1125 x 720 x 1005 mm)
  • Cooling Air Cool
  • Drive Closed-loop DC Servo Control
  • Maximum Motor Speed* 80 IPS
  • Speed Control Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)
  • Power Control Adjustable from 0~100% (Up to 16 color-linked power settings per job)
  • Engraving capability 256-level gray scale image processing capability
READ MORE
GCC S400
GCC S400

Your Best Ever, Beyond Expectation, Unlimited Laser Machine.

  • Work Area 40 x 24 in. (1016 x 610 mm)
  • Max. Part Size (W x L x H) All doors closed 41.4 x 25.4 x 11 in. (1053 x 647 x 280 mm)
    All doors open 41.4 x ∞ x 11 in. (1053 x ∞ x 280 mm)
  • Table Size Standard Grid Cutting Table 40.1 x 24.1 in. (1019 x 613 mm)
  • Dimensions (W x L x H) 56.7 x 34.5 x 41.3 in. (1440 x 900 x 1048 mm)
  • Weight CO2 30W~40W 260 kg / 573 lb
  • CO2 60~100W 270 kg/ 595 lb
  • Fiber 20W~60W 260 kg / 573 lb
  • Laser Source 10.6-μm CO₂ laser: 30 to 100W
    9.3-μm CO₂ laser: 60W, Fiber Laser: 20 to 60W
  • Cooling Air-cooled, Operating environment temperature 15°- 30°C (59°- 86°F)
  • Drive Closed-loop DC servo control
  • Maximum Motor Speed 140 IPS
  • Speed Control Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)
  • Power Control Adjustable from 0~100% (Up to 16 color-linked power settings per job)
  • Engraving capability 256-level gray scale image processing capability
READ MORE
GCC Spirit GLS Hypbrid
GCC Spirit GLS Hypbrid

CO2 & Fiber hybrid laser option in one machine system for both organic & metallic material processing.

  • Work Area 34 x 24 in. (860 x 610mm) Extendable to 38 x 24 in. (965 x 610 mm)
  • Max. Part Size (W x L x H) All doors closed 39 x 25 x 7 in. (990 x 635 x 177 mm)
    All doors open 39 x ∞ x 7 in. (990 x ∞ x 177 mm)
  • Table Size 40.3 x 27.7 in. (1025 x 705 mm)
  • Dimensions (W x L x H) 53.7 x 34.6 x 39.7 in. (1365 x 880 x 1010 mm)
  • Laser Source 10.6-μm CO2 laser: 30 to 100W
  • Fiber laser: 20 / 30 / 50W
  • Cooling Air-cooled, Operating environment temperature 15°- 30°C (60°- 86°F)
  • Drive Closed-loop DC servo control
  • Maximum Motor Speed 80 IPS
  • Throughput* 260.9 in²/ hr (1683 cm²/ hr)
  • Throughput* with SmartACT™ Enabled 322.1 in²/ hr (2078 cm²/ hr)
  • Speed Control Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)
  • Power Control Adjustable from 0~100% (Up to 16 color-linked power settings per job)
  • Engraving capability 256-level gray scale image processing capability
READ MORE
GCC Spirit GLS
GCC Spirit GLS

One of GCC’s flagship models deliver you extraordinary output quality with years R&D experience.

  • Work Area 34 x 24 in. (860 x 610 mm) Extendable to 38 x 24 in. (960 x 610 mm)
  • Max. Part Size (W x L x H) All doors closed 39 x 25 x 7 in. (990 x 635 x 177 mm)
    All doors open 39 x ∞ x 7 in. (990 x ∞ x 177 mm)
  • Table Size 40.3 x 27.7 in. (1025 x 705 mm)
  • Dimensions (W x L x H) 53.7 x 34.6 x 39.7 in. (1365 x 880 x 1010 mm)
  • Laser Source 30 to 100W 10.6-μm sealed CO2 Laser / 20W & 60W 9.3-μm sealed CO2 Laser Cooling
  • Air-cooled, Operating environment temperature 15°-30°C (60°-86°F)
  • Drive Closed-loop DC Servo Control
  • Maximum Motor Speed 80 IPS
  • Throughput* 260.9 in²/ hr (1683 cm²/ hr)
  • Throughput* with SmartACT™ Enabled 322.1 in²/ hr (2078 cm²/ hr)
  • Speed Control Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)
  • Power Control Adjustable from 0~100% (Up to 16 color-linked power settings per job)
  • Engraving capability 256-level gray scale image processing capability
READ MORE

1 2