STANDARD PROCESS AREAS

• Infinite 4000
  60″ Width. Lengths from 48″ to 50ft
• Infinite 5000
  72″ Width. Lengths from 120″ to 50ft
• Infinite 6000
  85″ Width. Lengths from 120″ to 50ft
• Infinite 8000
  103″ Width. Lengths from 120″ to 50ft
• INFINITE 10,000
  128″ Width. Lengths from 120″ to 50ft
• OPTIONAL ADDITIONAL LENGTH
  24″ Increments
• STANDARD GANTRY CLEARANCE
  6″
• OPTIONAL GANTRY CLEARANCE
  8″, 10″, 12″, 13″, 15″, 18″
• DRIVE SYSTEM
  X, Y – Rack and Pinion, Z – Ballscrew
• TYPICAL POSITIONING SPEED
  25m/min – 50m/min
• CONTROL SYSTEM
  AXYZ A2MC Controller
  7 Segment motion profile
  FPGA processor for high speed complex calculations
  Dedicated true NC control – G and M codes
  Network connection
  Large solid state on-board memory
  AXYZ Smart Console
• Power Requirements
  208-230V 3 Phase / 440-460V 3 Phase

STANDARD PROCESS AREAS

• Infinite 4000
  60″ Width. Lengths from 48″ to 50ft
• Infinite 5000
  72″ Width. Lengths from 120″ to 50ft
• Infinite 6000
  85″ Width. Lengths from 120″ to 50ft
• Infinite 8000
  103″ Width. Lengths from 120″ to 50ft
• INFINITE 10,000
  128″ Width. Lengths from 120″ to 50ft
• OPTIONAL ADDITIONAL LENGTH
  24″ Increments
• STANDARD GANTRY CLEARANCE
  6″
• OPTIONAL GANTRY CLEARANCE
  8″, 10″, 12″, 13″, 15″, 18″
• DRIVE SYSTEM
  X, Y – Rack and Pinion, Z – Ballscrew
• TYPICAL POSITIONING SPEED
  25m/min – 50m/min
• CONTROL SYSTEM
  AXYZ A2MC Controller
  7 Segment motion profile
  FPGA processor for high speed complex calculations
  Dedicated true NC control – G and M codes
  Network connection
  Large solid state on-board memory
  AXYZ Smart Console
• Power Requirements
  208-230V 3 Phase / 440-460V 3 Phase

STANDARD PROCESSING AREAS

• Trident 4000 Series
  60″ Width. Lengths from 48″ to 50ft
• Trident 5000 Series
  72″ Width. Lengths from 120″ to 50ft
• Trident 6000 Series
  85″ Width. Lengths from 120″ to 50ft
• Trident 8000 Series
  103″ Width. Lengths from 120″ to 50ft
• Trident 10000 Series
  128″ Width. Lengths from 72″ to 46ft
• OPTIONAL ADDITIONAL LENGTH
  24″ Increments (up to 8000 series)
  96″ Increments (10000 series)
• STANDARD GANTRY CLEARANCE / Z STROKE
  6″
• DRIVE SYSTEM
  X, Y – Helical Rack and Pinion
  Servomotors on all axes
• TYPICAL POSITIONING SPEED
  1,000 – 2,000 ipm
• CONTROL SYSTEM
  AXYZ A2MC Controller
  7 Segment motion profile
  FPGA processor for high speed complex calculations
  Dedicated true NC control – G and M codes
  Network connection
  Large solid state onboard memory
  AXYZ SmartConsole
• POWER REQUIREMENTS
  208-230 V 3 Phase / 440-460 V 3 Phase

• CUTTING AREA:
  F1612 – 129 cm (51 in.) wide x 305 cm (120 in.) long; up to 50 m (164 ft.) long in multi panel,
  F1330 – 129 cm (51 in.) wide x 305 cm (120 in.) long; up to 50 m (164 ft.) long in multi panel,
  F1832 – 184 cm (72 in.) wide x 320 cm (126 in.) long; up to 50 m (164 ft.) long in multi panel,
  F3220 – 327 cm (128.7 in.) wide x 210 cm (82.6 in.) long; up to 50 m (164 ft.) long in multi panel,
  F3232 – 327 cm (128.7 in.) wide x 320 cm (130.7 in.) long; up to 50 m (164 ft.) long in multi panel
  
• MEDIA WIDTH:
  F1612 – Up to 165 cm (65 in.),
  F1330 – Up to 134 cm (53 in.),
  F1832 – Up to 190 cm (75 in.),
  F3220 – Up to 332 cm (131 in.),
  F3232 – Up to 332 cm (131 in.)
  
• MULTI PANEL* 5000 cm (1968 in.) *Media clamps and roll-feed and/or conveyor belt system are required
  
• REPEATABILITY Within ± 0.05 mm on plots
  
• ACCURACY 0.05 % of move or 0.05 mm, whichever is greater

• Up to 600 mm(23.6″) media cutting width
  
• Up to 400 mm/sec(15.7ips) cutting speed
  
• Up to 250 grams of cutting force
  
• Maximum of 0.8 mm cutting thickness
  
• Dual port connectivity
  
• Handy grooved cut-off tool

• Expert II Series: EX II-24, EX II-24, LX EX II-52, EX II-52 LX
  
• Max. Cutting Width 600 mm (23.6 in.) 1320 mm (51.96 in)
  
• Max. Media Width 719 mm (28.3 in.) 1635 mm (64.37”)
  
• Acceptable Material Thickness 0.8 mm
  
• Max. Cutting Force 350 g
  
• Max. Cutting Speed 705 mm/sec (27.8 ips) (at 45 degree direction) 635 mm/sec (25 ips)
  (at 45 degree direction)
• Mechanical Resolution 0.012 mm (0.00047 in.)
  
• Software Resolution 0.025 mm (0.00098 in.)

• Upgrade to 500 grams of cutting force
  
• Upgrade to 40 inches per second of cutting speed
  
• Guaranteed 5 meters tracking
  
• Section Cutting
  
• Segmental Positioning (LX Models)
  
• Auto Rotation (LX Models)

• Up to 600 grams of cutting force
  
• Up to 60 inches per second of cutting speedGuaranteed 10 meters tracking
  
• Section Cutting
  
• Segmental Positioning
  
• Ingenious media basket
  
• Media take-up system for PPF cutting
  

• 10 meter tracking guaranteed
  
• Triple port, including USB, RS232 & Ethernet
  
• Up to 600 grams cutting force
  
• Up to 1530 mm (60″) per second cutting speed
  
• Can work with up to 0.8 mm (0.03″) thick material

• CUTTING TYPE True Tangential with OPOS CAM and Drag Knife Cutting Mode Capability
  
• CUTTING WIDTHS S2 TC75 76 cm (30 inch), Extended Mode: material width
  
• CUTTING SPEED All S Class 2 models cut at speeds up to 1414 mm (56 inches) per second diagonal
  
• AXIAL ACCELERATION Up to 4 G
  
• MAXIMUM ACCELERATION Up to 5.5 G diagonal