STANDARD PROCESS AREAS

• Infinite 4000
  60″ Width. Lengths from 48″ to 50ft
• Infinite 5000
  72″ Width. Lengths from 120″ to 50ft
• Infinite 6000
  85″ Width. Lengths from 120″ to 50ft
• Infinite 8000
  103″ Width. Lengths from 120″ to 50ft
• INFINITE 10,000
  128″ Width. Lengths from 120″ to 50ft
• OPTIONAL ADDITIONAL LENGTH
  24″ Increments
• STANDARD GANTRY CLEARANCE
  6″
• OPTIONAL GANTRY CLEARANCE
  8″, 10″, 12″, 13″, 15″, 18″
• DRIVE SYSTEM
  X, Y – Rack and Pinion, Z – Ballscrew
• TYPICAL POSITIONING SPEED
  25m/min – 50m/min
• CONTROL SYSTEM
  AXYZ A2MC Controller
  7 Segment motion profile
  FPGA processor for high speed complex calculations
  Dedicated true NC control – G and M codes
  Network connection
  Large solid state on-board memory
  AXYZ Smart Console
• Power Requirements
  208-230V 3 Phase / 440-460V 3 Phase

• Up to 3.2 m (126 in) roll width
•  Indoor high quality: 45 m²/hr (480 ft²/hr)
• Robust roll-to-roll design
• Roll handling up to 160 kg (350 lb)
• HP 881 5-liter Latex Ink Cartridges
• Internal print server and Printer status beacon

• Up to 3.2 m (126 in) roll width
•  Indoor high quality: 45 m²/hr (480 ft²/hr)
• Robust roll-to-roll design
• Roll handling up to 160 kg (350 lb)
• HP 881 5-liter Latex Ink Cartridges
• Internal print server and Printer status beacon

• Up to 3.2 m (126 in) roll width
•  Indoor high quality: 45 m²/hr (480 ft²/hr)
• Robust roll-to-roll design
• Roll handling up to 160 kg (350 lb)
• HP 881 5-liter Latex Ink Cartridges
• Internal print server and Printer status beacon

• Up to 3.2 m (126 in) roll width
•  Indoor high quality: 45 m²/hr (480 ft²/hr)
• Robust roll-to-roll design
• Roll handling up to 160 kg (350 lb)
• HP 881 5-liter Latex Ink Cartridges
• Internal print server and Printer status beacon

• Laser Material Processing Area (W x H)
  ULS PLS4.75 – 24 x 18 in (610 x 457 mm)
  ULS PLS6.75 – 32 x 18 in (813 x 457 mm)
  ULS PLS6.150D – 32 x 18 in (813 x 457 mm)
• Maximum Part Size (W x H x D)
  ULS PLS4.75 – 29 x 23 x 9 in (737 x 584 x 229 mm)
  ULS PLS6.75 – 37 x 23 x 9 in (940 x 584 x 229 mm)
  ULS PLS6.150D – 37 x 23 x 9 in (940 x 584 x 229 mm)
• Overall Dimension (W x H x D) 36 x 39 x 36 in (914 x 991 x 914 mm)
• Rotary Capacity Max Diameter 8 in (203.2 mm)
• Motorized Z Axis Lifting Capacity 40 lbs (18 kg)
• Available Focus Lenses 2.0 in (51 mm)
• HPDFO™ (High Power Density Focusing Optics)
• Laser Platform Interface Panel Keypad and LCD display show current file name, laser power, engraving speed, PPI and run time.

• Laser Material Processing Area (W x H)
  ULS VLS3.60 – 24 x 12 in (610 x 305 mm)
  ULS VLS4.60 – 24 x 18 in (610 x 457 mm)
  ULS VLS6.60 – 32 x 18 in (813 x 457 mm)
• Maximum Part Size (W x H x D)
  ULS VLS3.60 – 29 x 17 x 9 in (737 x 432 x 229 mm)
  ULS VLS4.60 – 29 x 23 x 9 in (737 x 584 x 229 mm)
  ULS VLS6.60 – 37 x 23 x 9 in (940 x 584 x 229 mm)
• Overall Dimension (W x H x D)
  36 x 38 x 30 in (914 x 965 x 762 mm)
• Rotary Capacity Max Diameter: 8 in (203 mm)
• Motorized Z Axis Lifting Capacity 40 lbs (18 kg)
• Available Focus Lenses 2.0 in (50 mm)
• HPDFO™ (High Power Density Focusing Optics)
• Laser Platform Interface Panel Five button keypad

• Laser Material Processing Area (W x H):
  ULS VLS 2.30 – 16 x 12 in (406 x 305 mm)
  ULS VLS 3.50 – 24 x 12 in (610 x 305 mm)
• Maximum Part Size (W x H x D)
  ULS VLS 2.30 – 18.75 x 14.6 x 4 in (476 x 370 x 102 mm)
  ULS VLS 3.50 – 26.75 x 14.6 x 4 in (679 x 370 x 102 mm)
• Overall Dimension (W x H x D)
  26 x 14 x 25 in (661 x 356 x 635 mm)
• Rotary Capacity Max Diameter:
  4.5 in (115 mm)
• Min Diameter:
  1 in (25.4 mm)
• Motorized Z Axis Lifting Capacity 20 lbs (9 kg)
• Available Focus Lenses 2.0 in (50 mm)
• HPDFO™ (High Power Density Focusing Optics)
• Laser Platform Interface Panel Five button keypad

• FMC 280 FMC 280-Z1
  
• Laser Source 1070nm fiber laser source, 1.5kW peak power
  
• Work Area Normal 28 x 14.5in. (712 x 370mm)
  
• With Thin Film Clamp 18 x 12 in. (458 x 305 mm)
  
• Max. Part Size (W x L x H) 30.9 x 21.3 x 4.7 in. (786 x 542 x 120 mm)
  
• Dimensions (W x L x H) 44.3 x 28.3 x 70.8 in. (1125 x 720 x 1800 mm)
  
• Cooling Air Cool
  
• Drive Closed-loop DC Servo Control
  
• Maximum Motor Speed 20 IPS
  
• Speed Control Adjustable from 0.1~100% (Up to 16 color-linked speed settings per job)
  
• Power Control Adjustable from 0~100% (Up to 16 color-linked power settings per job)
  
• Distance Accuracy 0.254 mm or 0.1% of move, whichever is greater
  
• Z-Axis Movement Automatic
  
• Engraving Capability) 256-level gray-scale image processing capability

• StellarMark I-series IFII 20JFL IFII 20SHS IFII 30JFL IFII 60JFL
  
• Laser Source Wavelength 1064 nm
  
• Type Yb-doped, MOPA
  
• Output Power 20W 30W 60W
  
• Beam Mode TEM00
  
• Beam Quality (M2) <1.3 <1.3 <1.3 <1.8
  
• Frequency 1-400 kHz 1-1000 kHz 1-400 kHz 1-400 kHz
  
• Waveform Single 25 Single Single
  
• Cooling Air-cooled
  
• Max. Linear Marking Speed 3,000 mm/s
  
• Max. Marking Speed 10,000 mm/s
  
• Electrical Requirements Power Supply 100~240V, 50/60 Hz Max 15 Amp
  
• Power Consumption Max. 1650W
  
• Dimensions Laser head L 508 x W 168 x H 185 mm
  
• Control unit L 470 x W 360 x H 241 mm
  
• Laser Marker Weight 9 kg
  
• Control Unit Weight 25 kg