Summa Cut Series S Class 2 Series
Contour cutting at its best – Drag cutting head
- Model
S2 75
S2 120
S2 140
S2 16o
- Dimensions
55 x 26 x 43 in.
(141 x 68 x 111 cm)
73 x 26 x 43 in.
(187 x 68 x 111 cm)
79 x 26 x 43 in.
(202 x 68 x 111 cm)
88 x 26 x 43 in.
(225 x 68 x 111 cm)
- Media Width
2 to 33 in.
(6 to 84 cm)
4.5 to 51 in.
(12 to 130 cm)
6 to 57 in.
(17 to 145 cm)
6 to 66 in.
(17 to 168 cm)
- Cutting Area
29 x 1968 in.
(74 cm x 50 m)
47 x 1968 in.
(120 cm x 50 m)
53 x 1968 in.
(135 cm x 50 m)
62 x 1968 in.
(158 cm x 50 m)
- ‘Oversized’ mode allows a wider cutting area : +/- 2.7 in. (7 cm)
- Alignment Type
OPOS X (OPOS-CAM : Factory upgrade on new Summa S Class 2 S160T)
Bar code Job recognition
Up to 2 x 64 marks on the X-line Y- Line compensation
- Tracking Performance
Within +/- 0.004 in. (0.1 mm) on plots: up to 40 ft. (12 m) long on rolls up to 760 mm wide*
up to 13 ft. (4 m) long on rolls over 760 mm wide*
- Accuracy – 0.2 % of movement or 0.010 in. (0.25 mm), whichever is greater*
- Speed – Up to 56 in. (141 cm) per second diagonal
- Acceleration – Up to 5.5 G diagonal
- Knife Pressure – Drag Knife: Up to 400 grams / Tangential Knife: Up to 600 grams
- Connectivity – USB; Ethernet
- Included Software – Cutter Control software; WinplotTM & MacSignTM Cut cutting software
READ MORE