For over three decades since 1987, Summa has delivered the world’s highest-quality vinyl and contour cutters and finishing flatbeds, without compromise. It has revolutionized cutting technology and has become a recognized global leader.
Summa F Series (F1330)
The most versatile flatbed cutting system ever.
CUTTING AREA:
F1612 – 129 cm (51 in.) wide x 305 cm (120 in.) long; up to 50 m (164 ft.) long in multi panel,
F1330 – 129 cm (51 in.) wide x 305 cm (120 in.) long; up to 50 m (164 ft.) long in multi panel,
F1832 – 184 cm (72 in.) wide x 320 cm (126 in.) long; up to 50 m (164 ft.) long in multi panel,
F3220 – 327 cm (128.7 in.) wide x 210 cm (82.6 in.) long; up to 50 m (164 ft.) long in multi panel,
F3232 – 327 cm (128.7 in.) wide x 320 cm (130.7 in.) long; up to 50 m (164 ft.) long in multi panel
MEDIA WIDTH:
F1612 – Up to 165 cm (65 in.),
F1330 – Up to 134 cm (53 in.),
F1832 – Up to 190 cm (75 in.),
F3220 – Up to 332 cm (131 in.),
F3232 – Up to 332 cm (131 in.)
MULTI PANEL* 5000 cm (1968 in.) *Media clamps and roll-feed and/or conveyor belt system are required
REPEATABILITY Within ± 0.05 mm on plots
ACCURACY 0.05 % of move or 0.05 mm, whichever is greater
Dimensions
55 x 26 x 43 in.
(141 x 68 x 111 cm)
73 x 26 x 43 in.
(187 x 68 x 111 cm)
79 x 26 x 43 in.
(202 x 68 x 111 cm)
88 x 26 x 43 in.
(225 x 68 x 111 cm)
Media Width
2 to 33 in.
(6 to 84 cm)
4.5 to 51 in.
(12 to 130 cm)
6 to 57 in.
(17 to 145 cm)
6 to 66 in.
(17 to 168 cm)
Cutting Area
29 x 1968 in.
(74 cm x 50 m)
47 x 1968 in.
(120 cm x 50 m)
53 x 1968 in.
(135 cm x 50 m)
62 x 1968 in.
(158 cm x 50 m)
‘Oversized’ mode allows a wider cutting area : +/- 2.7 in. (7 cm)
Alignment Type
OPOS X (OPOS-CAM : Factory upgrade on new Summa S Class 2 S160T)
Bar code Job recognition
Up to 2 x 64 marks on the X-line Y- Line compensation
Tracking Performance
Within +/- 0.004 in. (0.1 mm) on plots: up to 40 ft. (12 m) long on rolls up to 760 mm wide*
up to 13 ft. (4 m) long on rolls over 760 mm wide*
Accuracy – 0.2 % of movement or 0.010 in. (0.25 mm), whichever is greater*
Speed – Up to 56 in. (141 cm) per second diagonal
Acceleration – Up to 5.5 G diagonal
Knife Pressure – Drag Knife: Up to 400 grams / Tangential Knife: Up to 600 grams
Connectivity – USB; Ethernet
Included Software – Cutter Control software; WinplotTM & MacSignTM Cut cutting software